X

scroll down for video

scroll down for video

Want to get the same fabric used by Brands like Zara, Forever 21, HnM & Mango to make Long Skirts at low cost? If yes, then do watch out this video till end. Hello, this is Tushar from Charu Creation Pvt Ltd, a fashion fabric company at Nehru Place, New Delhi. So friends, we present a collection of pleated Poly Silk Fabrics, pleated Poly Georgette fabrics, Pleated Poly Chiffon fabrics for making long skirts. Currently, these fabrics are also in fashion for making designer sarees.

The width of our pleated fabrics starts from 38 inches. The price starts from Rs. 210 per meter inclusive of GST. Friends, I would like to inform you one important thing that we at Charu measure pleated fabrics without stretching the fabrics. Friends beware, half meter of pleated fabric can easily become 1 meter in length if measured with a stretch. 

Friends, to view our collection of pleated fabrics, check out the link given in the description of the video. Viewers, hurry as the stock is limited. Friends, I hope that apparels made out of our fabric collection would bring you lots of appreciation. For any enquiry regarding fabrics, you may call us at +91-9971106200 or email us at charu@charu.org.in. For regular updates, subscribe to this Youtube channel & press the bell icon. Thanks a lot.

1. Grain: For woven textiles, grain refers to the orientation of the weft and warp threads. The three named grains are straight grain, cross grain, and the bias grain.

Non-woven materials such as felt, interfacing or leather do not have a grain. a. straight grain: The straight grain is oriented parallel with the warp threads and the selvedge.

The straight grain typically has less stretch than the crossgrain since the warp threads will be pulled tighter than the weft during weaving. Most garments are cut with the straight grain oriented top to bottom b. the crossgrain: The cross grain runs perpendicular to the selvedge and parallel to the weft threads.

The cross grain generally has more stretch than the straight grain since the weft threads are generally looser than the warp during weaving. Most garments (like pants or shirts) are cut on the straight grain with the cross grain parallel with the floor when the wearer is standing. This allows more stretch through the width of the garment, such as in a pants leg which needs more circumferential than vertical stretch.

Garments are sometimes cut on the cross grain, generally because the pieces are too wide to fit on the straight grain. Bias: The bias grain of a piece of woven fabric, usually referred to simply as “the bias”, is at 45 degrees to its warp and weft threads.

Every piece of woven fabric has two biases, perpendicular to each other. A garment made of woven fabric is said to be “cut on the bias” when the fabric’s warp and weft threads are at 45 degrees to its major seam lines. Woven fabric is more elastic as well as more fluid in the bias direction, compared to the straight and cross grains.

This property facilitates garments and garment details that require extra elasticity, drapability or flexibility, such as bias-cut skirts and dresses, neckties, piping trims and decorations, bound seams, etc.

scroll down for video

https://www.youtube.com/watch?v=AoPiLg8DZ3A

scroll down for video

In my previous videos, I described fabric terminologies like warp, weft, selvedge, Grain & fiber. In this video, I shall explain the term Yarn. When there is more than one fiber interlocked, it is called yarn. A long continuous strand of interlocked or twisted fibers is yarn. Textile yarn can be made with natural fiber, synthetic or man made fibers.

The essential requirements for fibers to be spun into yarn include a length of at least 5 millimeters, flexibility, cohesiveness, and sufficient strength. Other important properties include elasticity, fineness, uniformity, durability, and luster. The process of making yarn is called spinning. Yarn can be spun by machine or by hand. Yarn used for weaving tends to have a tight twist, smooth surface, and lots of lengthwise strength. Yarn for knitting has a looser twist. All textile yarn is classified according to structure, or how they are made. In general, there are three basic classifications. Let’s look at each of them.

• Staple fiber yarns are made of many short staple fibers that are wound together to make yarn. This is the most basic classification of yarn. Most staple fiber yarns are made of natural materials.

• Ply yarns are made of one or more strands of staple fiber yarns. A single ply yarn is a single strand of staple fibers held together by twisting. Two- and three-ply yarns are made of two or three single yarns twisted together. Multiple-ply yarns are used for fabrics that might require more strength or fabrics that need a desired surface effect.

• Filament yarn is made of one or more continuous strands that run the entire length of the yarn. These are much longer than staple fibers. Silk is the only natural filament yarn. Most filament yarns tend to be made from synthetic materials created by mechanical or chemical processes.

To know more about fabrics you may connect us at +91-9818435005 or visit us at charu.org.in We are offering fashion fabrics at Rs. 99/ mtr on our website for a limited period. Do remember to watch my next video where I would continue with fabric terminologies. Please subscribe to our you tube channel named “Charu Creation Pvt Ltd” and press the bell icon to get more infos on fabrics.


https://www.youtube.com/watch?v=1TWgPSkSPrk

I described fabric terminologies like warp, weft, selvedge, Grain, fiber & Yarn. In this video, I shall explain the term Yarn Count and its measurement according to the Indirect of Fixed weight system.Count or yarn count is a numerical expression which indicates the coarseness or fineness of a yarn.

In other words, yarn count is a number indicating the mass per unit length or the length per unit mass of the yarn. There are mainly two systems or ways of yarn count measurement, these are :(a)  Indirect System / Fixed weight system ( length per unit mass )(b)  Direct system / Fixed length system( mass per unit length )Indirect system of yarn count measurement:

The indirect system or fixed weight system is the yarn count system where the count of a yarn is calculated by measuring the length of a fixed / definite mass. In this system, the count of yarn is the number of length units in one weight unit.

So, the count number indicates the length per unit mass of the yarn. That is why, higher the count, finer the yarn. In indirect count system, the mass of yarn is fixed and the length of yarn varies according to its fineness.  This system is widely used for measuring count of cotton yarns.

The formula to calculate yarn count in indirect system is simple. It is calculated by dividing variable length of the yarn by fixed mass of the yarn. Some of the most commonly used indirect systems include : 1)English cotton count (Ne) system, 2) Metric count (Nm) system, 3) Worsted count (NeK) system,4) Woollen count system.

scroll down for video

https://www.youtube.com/watch?v=3_XLfBXExr4&t=14s


Buy Fabrics

https://youtu.be/1LEVr3Mlujg


Buy Fabrics

https://youtu.be/Dk1ijWaIVyY


Buy Fabrics

https://youtu.be/7hVVLAGDxxA


Buy Fabrics

https://youtu.be/J83fMZdJm2A


Buy Fabrics

https://youtu.be/XzbDYDfc0Ro

0
  • You cannot add "Light Yellow Plain Cotton Cambric Dress Material Fabric" to the cart because the product is out of stock.
0
Your Cart
Your cart is emptyReturn to Shop